@article { author = {Shaegh, Seyed Shojaeddin and Salari, Alimohammad and Ayoubi, Mohsen}, title = {The Effect of Abutment Surface Roughness on the Retention of Implant-Supported Crowns Cemented with Provisional Luting Cement}, journal = {Daneshvar Medicine}, volume = {21}, number = {1}, pages = {19-26}, year = {2013}, publisher = {Shahed University}, issn = {2716-9723}, eissn = {2716-9731}, doi = {}, abstract = { Background and Objective: Surface roughness can increase the retention of castings by sandblast that are micro retentive. This study compared the retention of implant-supported crowns when used with 3 different surface roughness abutments and one temporary cement.  Materials and Methods: Thirty abutments (DIO implant- Cemented abutment,SAC 4814N(II)) were divided in three groups, first group was standard machine surface, second group sandblasted with 25 micron aluminum oxide particles and third group was sandblasted with 50 micron than ten regular diameter implant analogs were embedded in resin acrylic block and provisional cement kerr Temp bond NE was used for cementation.90 metal coping were fabricated and after cementation the aging processing was done than the retentive strength was tested with universal testing machine at cross head speed of 0.5 mm/min, results were analyzed using One way ANOVA and Tukey test.   Results: Retentive strength of temp bond kerr with 50 micro sanbblasted abutment was statistically different than two other groups(P < 0.001) .and between all the group standard abutment was weakest.   Conclusion: Surface modification of implant abutment by sandblast may be an effective method to increase retention of crown when provisional luting cement is used. }, keywords = {Abutment,dental implant,restoration,Retention,surface roughness}, title_fa = {بررسی تاثیرخشونت سطحی اباتمنت بر میزان استحکام گیر رستوریشنهای سمان شونده متکی بر ایمپلنت با سمان موقتی}, abstract_fa = { مقدمه و هدف: خشونت سطحی با ایجاد گیر میکرو مکانیکال می‌تواند باعث افزایش گیر رستوریشن‌های سمان شونده گردد. از طرفی مزیت مهم سمان ‌های موقتی قابلیت بازیابی آنها می‌باشد. این تحقیق به منظور ارزیابی تاثیر سمان موقتیTemp bond Kerrو همچنین سند بلاست کردن سطح اباتمنتها با ذرات اکسیدآلومنیوم با قطرهای 25 و50  میکرون بر روی میزان استحکام گیر پروتزهای ثابت سمان شونده متکی برایمپلنت می باشد.   مواد و روشها: در این مطالعه 30 عدد اباتمنت (DIO - Cemented abutment,SAC 4814N(II))به سه گروه تقسیم شدند،گروه اول به صورت استاندارد بدون سندبلاست،گروه دوم  با ذرات 25میکرون وگروه سوم با ذرات 50 میکرون اکسیدآلومنیوم سندبلاست شدند، سپس90 عدد coping از آلیاژ Base metal ساخته شد و با استفاده از سمان موقت Temp bond Kerrبر روی اباتمنت‌ها سمان شدند سپس نمونه‌ها درون بزاق مصنوعی به مدت 24 ساعت در دمای 37 در جه و رطوبت 100% نگهداری شده در ادامه پس از انجام Thermocycling و Cyclic loading میزان گیر هر یک از نمونه‌ها با استفاده ازuniversal testing machine با سرعت  cross head speed -5/0cm/min اندازه‌گیری شد. نتایج بدست آمده توسط آزمون آماریone way ANOVAوtukey test مورد ارزیابی قرارگرفت.   نتایج: اختلاف معنا داری بین سطوح سند بلاست شده وجود داشت. استحکام کششی سمانTemp bond kerr با اباتمنت‌های سند بلاست شده با50 میکرون بیشتر از سایر گروه‌ها بود ولی از نظر آماری اختلاف معناداری بین این گروه اباتمنت‌های سندباست شده با گروه سندبلاست شده با ذرات اکسید آلومنیوم 25 میکرون مشاهده نشد(P < 0.001). دربین تمام گروهها، اباتمنت‌های استاندارد کمترین میزان استحکام گیر را نشان دادند.   نتیجه‌گیری: عمل سندبلاست کردن سطوح اباتمنت باذرات اکسیدآلومنیوم باعث افزایش میزان گیر رستوریشن های سمان شونده با سمان موقتی می شود.  }, keywords_fa = {ایمپلنت,گیر,سمان موقتی,سندبلاست,اباتمنت}, url = {https://daneshvarmed.shahed.ac.ir/article_1562.html}, eprint = {https://daneshvarmed.shahed.ac.ir/article_1562_4c4560b1339eed7e9853dcc1a18a4220.pdf} }